How to setup the sensors
The following instructions work for all kind of refrigeration appliance.
Scan the sensor's QR code from the TrustEat mobile application and define the settings of the concerned cold spot.
Define where to stick the sensor, it must be as high as possible (for connectivity matters)
If your sensor is given with cable probe, the device must be outside.
If your sensor does not have cables probe, it must be inside the refrigeration appliance
This place will determine the quality of temperature reception.
Stick the double-side tape on the back of the sensor.
Clean the application surface and mak sure it is damp.
Stick the device vertically (logo must be readable).
First measures can take some time to appears: wait few hours to check the reception of temperatures.
If your sensor has cable probe, the kit also contains plastic hose clamp and associated adhesive base.
The cable probe must be sticked in the background of the refrigeration appliance (to reduce temperature variations), and not close to lights.
Please take care of th cable probe's placement to avoid any probe removal and cable tearing.
If you have any trouble with our service? Feel free to contact us on the support, by mail ( support@trust-eat.com ) or by phone ( +33 (0)3 74 67 15 71 ).
Scan the sensor's QR code from the TrustEat mobile application and define the settings of the concerned cold spot.
Define where to stick the sensor, it must be as high as possible (for connectivity matters)
If your sensor is given with cable probe, the device must be outside.
If your sensor does not have cables probe, it must be inside the refrigeration appliance
This place will determine the quality of temperature reception.
Stick the double-side tape on the back of the sensor.
Clean the application surface and mak sure it is damp.
Stick the device vertically (logo must be readable).
First measures can take some time to appears: wait few hours to check the reception of temperatures.
If your sensor has cable probe, the kit also contains plastic hose clamp and associated adhesive base.
The cable probe must be sticked in the background of the refrigeration appliance (to reduce temperature variations), and not close to lights.
Please take care of th cable probe's placement to avoid any probe removal and cable tearing.
If you have any trouble with our service? Feel free to contact us on the support, by mail ( support@trust-eat.com ) or by phone ( +33 (0)3 74 67 15 71 ).
Updated on: 01/02/2022
Thank you!